Bienvenue invité ( Connexion )

> Casque SSsh 94
WebMaster
* Aug 4 2017, 08:01 AM
Message #1


Administrateur
****

Groupe : Administration
Messages: 5409
Inscrit : 25-October 06
Lieu : Bordeaux
Membre No. : 1



Bonjour à tous,

Je fais ce rapide post pour vous présenter rapidement une de mes dernières rentrées en matière de casque russe.
Casque SSsh 94, successeur du STsh 81 qui était fabriqué en titane.
Les plaques du SSsh 94 sont en acier, ce qui lui donne un poids de 3,3 kg.




Je n'ai pas eu le temps de faire de photos de l'unité complète, sac de transport, couvre-casque "Flora" et blanc, et petite unité de réparation, mais vous trouverez tout cela dans la future fiche de ce casque.
Toutefois, j'ai déjà créé une annexe pour la notice incluse dans le sac.

http://world-war-helmets.com/annexe.php?q=...-casque-SSsh-94
ou en PDF
http://world-war-helmets.com/documentation...sie_SSsh-94.pdf

J'ai aussi réussi à mettre la main sur celle du STsh-81.
http://world-war-helmets.com/documentation...sie_STsh-81.pdf

Si quelqu'un serait capable de me traduire ces documents, je lui en serai infiniment reconnaissant.

wink.gif


User is offlineProfile CardPM
Go to the top of the page
 
Réponse(s)
WebMaster
* Aug 7 2017, 04:53 PM
Message #2


Administrateur
****

Groupe : Administration
Messages: 5409
Inscrit : 25-October 06
Lieu : Bordeaux
Membre No. : 1



Hi Ogrin,

Translate to english, it'll be easier for me wink.gif
User is offlineProfile CardPM
Go to the top of the page
Ogrin
* Aug 7 2017, 05:29 PM
Message #3


Nouveau membre
*

Groupe : Members
Messages: 40
Inscrit : 14-October 16
Lieu : Россия
Membre No. : 16399



page 1
(in brackets are my comments)

Изделие ССШ-94 "Сфера - С"

АНВЯ 6.033.033 ТУ (номер технических условий, не переводится, внутренний номер предприятия)

Техническое описание
и инструкция по эксплуатации


Product SSSH-94 "Sphere-С"

АНВЯ 6.033.033 TU (number technical conditions, is not translated, the internal number of the factory)

Technical definition
and operating instructions (user manual)
User is offlineProfile CardPM
Go to the top of the page
Ogrin
* Aug 7 2017, 06:07 PM
Message #4


Nouveau membre
*

Groupe : Members
Messages: 40
Inscrit : 14-October 16
Lieu : Россия
Membre No. : 16399




page 2

Изделие ССШ-94 "Сфера - С"
Паспорт, техническое описание и инструкция по эксплуатации
паспорт
1. Общие сведения об изделии
Изделие "Сфера -С" предназначено для индивидуальной защиты человека, для защиты головы.
Обозначение: партия 24, номер изделия 048
Дата изготовления 23.05.2000 год
Изготовитель КОЭСП-2 МВД РФ ( http://спецброня.рф )

2. Основные технические данные и характеристики
Площадь защиты изделия, кв. дм - 10
Интервал рабочих температур, градусов Цельсия - "от -40 до +40"
Масса шлема без упаковочной сумки, кг - 3,5+-0,1
Класс защиты - 2

3. Комплект поставки
Специальный стальной шлем ССШ-94 "Сфера-С" - 1 штука
Чулок камуфлирующий - 2 штуки
Сумка - 1 шт.
Эксплуатационная документация - 1 экземпляр.

Специальный стальной шлем "Сфера-С" №048 изготовлен и принят в соответствии с действующей документацией и признан годным к эксплуатации.
(квадратный штамп ОТК отдел технического контроля)
_______ОТК 23.05.2000
(круглый штам, Представитель заказчика № 10205, в центре МВД РФ.) (Это штамп представителя МВД на предприятие, означает что шлем осмотрен и принят заказчиком)
______ Представитель заказчика 23.05.2000

5. Гарантийные обязательства
Изготовитель гарантирует эксплуатацию шлема в течение трех лет, считая со дня его приемки представителем заказчика, из них один год непосредственной эксплуатации и два года сохранности изделия.

Product SSSH-94 "Sphere-C"
Passport, technical description and manual
passport
1. General information about the product
The product "Sphere-C" designed for personal protection, for head protection.
Designation: party 24, the produc number 048
Production date 23.05.2000 year
Fabricator "koesp-2" of the MVD RF (Ministry of interior of the Russian Federation) ( http://спецброня.рф )

2. Main technical data and characteristic
Area protected, sq. DM (decimeter2) - 10
Interval of working temperatures, degrees Celsius - "from -40 to +40"
The helmet weighs without packaging bags, kg 3,5+-0,1
Protection class - 2

3. package contents
Special steel helmet SSSH-94 "Sphere-C" - 1 piece
Stocking cover camouflage- 2 pieces
Bag - 1 PC.
Operational documentation - 1 copy.

Special steel helmet "Sphere-C" №048 manufactured and accepted in accordance with the applicable documentation and is fit for operation.
(square stamp OTK Department of technical control)
_______OTK 23.05.2000
(all strains, the Representative of the customer number 10205 in the center of the MVD RF.) (This is the stamp of the representative of the MVD to the company, means that the helmet is inspected and accepted by the customer)
______ The customer representative 23.05.2000

5. warranty obligation

The manufacturer guarantees operation of the helmet within three years from the date of its acceptance by the customer representative, including one year of direct operation and two years the safety of the product.

User is offlineProfile CardPM
Go to the top of the page
Ogrin
* Aug 7 2017, 06:38 PM
Message #5


Nouveau membre
*

Groupe : Members
Messages: 40
Inscrit : 14-October 16
Lieu : Россия
Membre No. : 16399




page 3 (it is very difficult to translate a lot of terms)

Техническое описание

1. Назначение
Шлем ССШ-94 предназначен для обеспечения защиты головы человека от возможных ранений пулями, при обстреле из следующих типов оружия: пистолет ТТ калибр 7,62 мм, пистолет ПМ калибр 9,0 мм, пистолет ПСМ калибр 5,45 мм, пистолетов калибра 8,35 и 5,6 мм, а также воздействия осколочными, шариковыми и стреловидными поражающими элементами. Шлем снижает динамическую нагрузки, возникающие при воздействии вышеуказанных средств поражения. Шлем не является предметом постоянного ношения.

2. Технические данные

Площадь защиты головы человека не менее 10 дециметров в квадрате. Геометрические размеры шлема: высота 250+-5 мм, ширина 240+-5 мм. Масса шлема не должна превышать 3,5+-0,1 кг. Шлем должен сохранять свои эксплуатационные качества в диапазоне температур от -40 до +40 градусов Цельсия.

3. Конструкция и состав изделия

Конструкция шлема состоит из тканевой части (ткань капроновая) с тремя карманами для установки защитных элементов (пластины из стали Ц-86, толщиной 2 мм), обеспечивающими защиту лобовой, теменной, затылочной, а также височной частей головы человека. Конструкция шлема предусматривает регулировку тканевой части на размеры головы человека от 56 до 60. В подтулейной части шлема предусмотрена установка демпферов из пенополиуретана, предназначенных для поглощения динамического воздействия пули на голову человека при обстреле.

Инструкция по эксплуатации

1. Подготовка к работе

Перед эксплуатацией шлем необходимо внимательно осмотреть и проверить, обратив внимание на следующее: сохранность тканевой части, непрерывность строчки, надежность прошивки карманов под металлические пластины защитных элементов, состояние шнуровки, закрывающей карманы с металлическими пластинами, надежность пряжки подбородочного ремня и наличие всех металлических пластин.


Technical details

1. Appointment
Helmet SSSH-94 is intended to protect the human head from possible injury by bullets, the shelling of the following types of weapons: TT pistol caliber 7,62 mm pistol PM's caliber 9,0 mm PSM pistol caliber 5,45 mm caliber pistols and 5.6 mm 8,35, as well as the impact of shrapnel, ball and arrowy strikes element. The helmet reduces the dynamic loadings arising at influence of the above means of destruction. Helmet is not subject to constant wear.

2. Technical data

The area of protection of the human head at least 10 decimeters squared. The geometric dimensions of the helmet: 250+-5 mm, width 240+-5 mm. Weight of the helmet must not exceed 3.5+-0,1 kg. Helmet must retain its operating characteristics at temperatures from -40 to +40 degrees Celsius.

3. Design and composition of the product

The design of the helmet consists of fabrics (nylon fabric) with three pockets for installation of protective elements (plates of steel C-86, 2 mm thick) that protects the frontal, parietal, occipital and temporal parts of a human head. Helmet design provides for adjustment of fabric pieces to the size of a human head from 56 to 60. In podolany of the helmet provides installation of dampers made of polyurethane foam, designed to absorb the dynamic impact of bullets on a man's head when firing.

The manual

1. Preparation for work

Before using the helmet you need to carefully inspect and check, paying attention to the following: the safety of the fabrics, the continuity of lines, the reliability of the firmware of the pockets under the metal plate of the protective elements, the state of the lacing that closes the pockets with metal plates, the reliability of the buckle chinstrap, and metal plates
User is offlineProfile CardPM
Go to the top of the page
Ogrin
* Aug 7 2017, 06:59 PM
Message #6


Nouveau membre
*

Groupe : Members
Messages: 40
Inscrit : 14-October 16
Lieu : Россия
Membre No. : 16399




page 4

Надеть шлем на голову и подбородочный ремень затянуть до полного прилегания к голове боковых и средней части. В случае недостаточного или слишком плотного прилегания боковых частей к голове необходимо произвести регулировку тканевой части путем затягивания или ослабления внутренней шнуровки, находящейся под верхней пластиной посередине, после этого вставить верхнюю пластину, зашнуровать верхнюю шнуровку и чехлами, пришитыми спереди и сзади, закрыть шнуровку сверху.

2. Послеэксплуатационная проверка

Осмотреть тканевую часть шлема и проверить целостность демпфирующих элементов. На шлеме не должно быть загрязнений, надрывов ткани, нарушений строчек швов, разрывов шнуровки. При намокании изделие просушить, исключая близкое расположение к открытому огню, нагревательным приборам.

3. Правила хранения

Изделие необходимо хранить вдали от нагревательных приборов (не ближе 1 метра), избегать попадания на них влаги и прямого воздействия солнечных лучей, Запрещается совместное хранение с нефтепродуктами, кислотами, легковоспламеняющимися веществами. Температура в пемещении должна быть в пределах от 0 до +30 градусов. Соотносительная влажность воздуха должна быть в пределах от 40 до 70%.

Движение изделия в эксплуатации (таблица)

1. Дата получения
2. Подпись лица, получившего изделие
3. За кем закреплено изделие
4. Должность, фамилия и подпись ответственного за подготовку изделия
5. Подпись владельца изделия


To wear a helmet on the head chinstrap and tighten until it is tight to the head side and middle part. In case of insufficient or too tight fit of the side pieces to the head need to adjust the fabric part by tightening or loosening the inner lacing under the top plate in the middle, then insert the upper plate, lace up top and lace-up covers, sewn front and rear, close the laces at the top.

2. Postexploitation check

Inspect the fabric part of the helmet and to verify the integrity of the damping elements. On the helmet should be no dirt, rips or tears of the fabric, irregularities of the lines of the seams, tears lacing. When wet product to be dried, except the location close to the open fire, heating devices.

3. Retention rules

The product must be stored away from heaters (not closer than 1 meter), avoid contact with moisture and direct sunlight, it is Prohibited to store together with petroleum products, acids, flammable substances. The temperature in pomesheniy should be in the range from 0 to 30 degrees. Relative humidity should be between 40 to 70%.

The movement of the product in use (table)

1. Date of receipt
2. Signature of the person who received the product
3. For whom fixed the product
4. Position, surname and signature responsible for the preparation of the product
5. The signature of the owner of the product
User is offlineProfile CardPM
Go to the top of the page

Les messages de ce sujet
WebMaster   Casque SSsh 94   Aug 4 2017, 08:01 AM
silmar65   salut, je ne connais pas, ravi de faire sa connais...   Aug 4 2017, 08:12 PM
WebMaster   Merci pour ton avis David. Personne n'est apt...   Aug 7 2017, 07:52 AM
Ogrin   Je peux traduire du russe vers l'anglais de me...   Aug 7 2017, 03:38 PM
WebMaster   Hi Ogrin, Translate to english, it'll be easi...   Aug 7 2017, 04:53 PM
Ogrin   page 1 (in brackets are my comments) И...   Aug 7 2017, 05:29 PM
Ogrin   page 2 Издел...   Aug 7 2017, 06:07 PM
Ogrin   page 3 (it is very difficult to translate a lot of...   Aug 7 2017, 06:38 PM
Ogrin   page 4 Надет...   Aug 7 2017, 06:59 PM
WebMaster   Hi Ogrin, Thanks for your great work, I can now t...   Aug 8 2017, 09:46 AM
WebMaster   Voilà la traduction du passeport en français, av...   Aug 8 2017, 12:54 PM
WebMaster   Ogrin, can you translate me the last line of the p...   Aug 8 2017, 01:09 PM
Ogrin   последн...   Aug 8 2017, 06:06 PM
WebMaster   Thanks Ogrin. I know for sphere-C, but steel in f...   Aug 8 2017, 06:09 PM
WebMaster   Fiche en ligne, merci à Claude, Luc et Ogrin pour...   Aug 28 2017, 06:19 PM
maza   Fiche en ligne, merci à Claude, Luc et Ogrin pou...   Aug 29 2017, 07:05 AM
Ogrin   Dans la dernière ligne n'est pas assez de mot...   Aug 28 2017, 07:32 PM
Lescure40   Bonjour, Merci pour cette fiche. Bravo pour la co...   Aug 30 2017, 02:42 PM
Hk61   Très bien faite cette fiche et surtout très bell...   Aug 30 2017, 02:51 PM
WebMaster   Effectivement, nous nous en tenons presque à un d...   Aug 30 2017, 02:53 PM
Hk61   Si besoin j'ai le 6B7 et le 6B27 (Kitoko a aus...   Aug 30 2017, 03:37 PM
WebMaster   C'est trop compliqué de faire faire les photo...   Aug 30 2017, 03:51 PM


1 utilisateur(s) sur ce sujet (1 invité(s) et 0 utilisateur(s) anonyme(s))
0 Membre(s):

 



Nous sommes le : 20th November 2026 - 05:06 AM